SKU: B-AP-4-1012-SIC-SC-ICW

Level 4 Body Armor ICW Up Armor Plate

Level IV ICW UP-ARMOR PLATE

$295.00

or 4 interest-free payments of $73.75 with

In stock

protection

NIJ.06 Level 4 ICW (stops multiple .30-06 AP rounds with IIIA backer)

Weight

At only 5.6 lbs this plate stops multiple AP rounds when used with IIIA backer.

Material

PE+ Ceramic Composite Plate.

QUALITY

Our Armor Plates are independently tested at NTS Chesapeake Laboratory.

DESCRIPTION

Level 4 ICW

Up Armor Plate

When worn together with level IIIA backing soft armor this Ace Link Armor ceramic composite hard armor platehas been designed to provide level IV protection against multiple .30-06 Armor Piercing rounds. Comes coated with weatherproof polyurethane to absorb and completely contain rifle rounds, up to powerful .30-06 APM2.

SPECIFICATION

QUICK SPECS

INCREDIBLY LIGHT MULTI-HIT TECHNOLOGY STOPPING AP ROUNDS

IN CONJUCTION WITH LEVEL IIIA SOFT ARMOR PANELS

When worn together with level IIIA backing soft armor this Ace Link Armor ceramic composite hard armor plate has been designed to provide level IV protection against multiple .30-06 Armor Piercing rounds. Comes coated with weatherproof polyurethane to absorb and completely contain rifle rounds, up to powerful .30-06 APM2.

Tested to be truly multi-hit, this plate is the most reasonable choice for those looking for Up-Armor Plate that stops AP rounds (when used with IIIA backing).

EDGE-TO-EDGE PROTECTION

Ballistic structure designed and manufactured to provide fullest possible spectrum of protection against rifle threats.

WEIGHT ONLY 5.20 LBS

Extremely durable yet incredibly light! This plate is significantly lighter then any steel plate of similar configuration and protection rating.

UP-ARMOR PLATE

This plate is capable of stopping multiple AP rounds when worn with IIIA backing panel. For the best performance make sure to use it with Ace Link Armor IIIA soft armor panel. Stand Alone Armor Plate is here.

INDEPENDENT TESTING

Testing is part of our Quality Control process. We test body armor plates to the NIJ-0101.06. We know that these test reports are important especially for law enforcement so we include them with each package!

NIJ CHART

Protection level
Stops
Material
Weight
Thickness
LEVEL IIIA
.357 SIG, .44 MAGNUM
100% PE PLATE
AS LIGHT AS 1.1 LBS.
0.90″
LEVEL III
7.62 M80; .308 CAL
UHMW POLYETHYLENE
AS LIGHT AS 3.3 LBS.
0.90″
LEVEL III+
5.56 M855 GREEN TIP, 7.62X54R
PE+ CERAMIC-COMPOSITE
AS LIGHT AS 4.4 LBS.
0.85″
LEVEL IV
5.56 M855, .30-06 APM2
PE+ CERAMIC-COMPOSITE
AS LIGHT AS 6.0 LBS.
0.90″
LEVEL IIIA LEVEL III LEVEL III+ LEVEL IV

PRODUCT REVIEWS

SAVE ON WEIGHT AND BE SAFE FROM SPALLING

At only 5.60 lbs this composite plate is capable of stopping multiple armor piercing rounds when used with soft armor backing. Silicon Carbide ceramic disperses impact energy effectively, without risk of dangerous spalling. Protection against armor piercing .30-06 APM2 rounds has never been so light and risk-free.

EXTENDED CERAMIC COVERAGE

Increased protection area provided by ceramic ballistic plate – choose Ace Link Armor plates with Extended Ceramic Coverage for the most comprehensive protection of your vitals. There is no compromises when it comes to your safety!

KNOW ABOUT Level IV Armor Plates

Level IV ICW UP-Armor Plates

Level IV ICW UP-Armor Plates

Made to wear on the upper body for personal protection against armor-piercing (AP) rounds, Ace Link Armor’s level IV body armor plates are quality composite armor utilizing the highest grades of Ultra High Molecular Weight (UHMW) Polyethylene layers of backing, enhanced by silicon carbide ceramic on the strike face of the plate structure weighing in at 6 lbs. Level IV body armor can be found in three main plate sizes, 6×6, 6×8; 10×12 so you can find the right fit for your plate carrier or tactical vest.Level IV body armor is a type of personal body armor made from layers of various composites. Pure metal versions were used during the medieval period and modern versions of body armor and plates are still widely used today by civilians, police officers, and military forces all over the world to protect themselves against gunfire. However, it’s important to note that modern technology offers body armor solutions that are much lighter than steel plates.These level IV plates are of the highest level of body armor and personal protection out there on the market.

Will this plate stop Armor piercing rounds?

Yes! However unlike our standalone, this will require a 3A backing in order to ensure effective use.

What advantages does this offer over a Stand-Alone plate?

If you already own 3A soft armor, getting ICW plates will allow you to have more adaptability to situation you may find yourself in, without committing to the extra weight of stand alone plates if they are not required.

Where are your plates tested?

All our plates are tested In independent NIJ certified laboratories such as OBL and NTS Chesapeake, testing reports are available upon request.

What types of cut do you offer?

We offer standard 10×12 SAPI cut for our LEVEL 4 plates.

How thick are the ICW plates compared to Stand Alone?

They offer the same amount of thickness at approximately 0.85u0022

Yes! However unlike our standalone, this will require a 3A backing in order to ensure effective use.

If you already own 3A soft armor, getting ICW plates will allow you to have more adaptability to situation you may find yourself in, without committing to the extra weight of stand alone plates if they are not required.

All our plates are tested In independent NIJ certified laboratories such as OBL and NTS Chesapeake, testing reports are available upon request.

We offer standard 10×12 SAPI cut for our LEVEL 4 plates.

They offer the same amount of thickness at approximately 0.85u0022

Reviews

There are no reviews on the product.
Your opinion may be the first.
Add it…

arrow go back

YOUR SHOPPING CART

your cart is empty

Login Close