Bulletproof Vest Level IIIA Standard
NIJ.06 Level IIIA protection level (handgun threats up to .44 Magnum)
This Body Armor Accommodates Hard Armor Plates (10×12″) Front & Back
Durable 500D Nylon Fabric
8 Years Warranty on Armor
Made in USA
Armor Panels made in USA
SKELETAC HYBRID BULLETPROOF VEST
- MATERIAL: Made of Tough 500D Nylon Fabric, plus low reflective Matte Black Laminate Nylon surfaces.
- HARD ARMOR POCKETS: Front and Rear Insert plate pouches with pull-tab no-flap slash opening and Hook and Loop closure.
- HEAVY-DUTY: Shoulders adjustment straps reinforced with high-performance synthetic rubber with laser-cut MOLLE for PTT or Bluetooth mic.
- CUMMERBUND: Twin-Elastic outer side cummerbund with hook and loop closures and laminate nylon pull-tabs.
- HOOK’N’LOOP front area with Laser Cut MOLLE for mounting pouches and pockets.
- ID PLACARD placement areas with hook and loop for visible or IR identification.
- COMPATIBLE with Skeletac Kangaroo Pouch System with double-buckle secure placement and hook and loop panel.
- MUTLI-SIZE cummerbunds available for wide array of body sizes and torso lengths.
- ELASTIC LOOP TABS for routing hydration tubes or comms wiring.
- ROBUST emergency rescue drag handle
- SPACE MESH interior constitutes one of the most comfortable ventilation and antimicrobial protection systems on the market.
- INCLUDED: 2x Swift Clip Buckles.
WARRANTY & QUALITY
HYBRID BULLETPROOF VEST
Designed to meet and exceed your plate carrier expectations and standards – The Skeletac Hybrid Bulletproof Vest combines durable 500D Cordura Nylon fabric with non-texture, low reflectivity Laminate Nylon that is both tear-resistant and MOLLE compatible- for load-bearing ammo and equipment pouches mounted on laser cut molle areas.
Fully adjustable for torso length and girth- the Hybrid Plate Carrier Vest has hook and loop adjustable waist cummerbund and shoulder straps.
STOPS MULTIPLE .44 MAGNUM ROUNDS
UP ARMOR WITH LEVEL IV ICW
Ballistic structure designed and manufactured to provide the fullest possible spectrum of protection against rifle threats
TESTED AT INDEPENDENT LABORATORY
STANDARD PANEL KEY FEATURES:
- Level IIIA Protection
- Comprehensive ballistic protection. NIJ.06 IIIA structure.
- Stops multiple rounds of various handgun threats (up to .44 magnum).
- Stops multiple threats: 9mm FMJ RN, 9mm Luger or NATO, .40 S&W, .357 Magnum, .357 Sig, .45 Gap, .44 Magnum
- Tested at independent laboratory
- Armor Panels Made In USA
Skeletac Hybrid Vest with Flexcore
BODY ARMOR MADE IN USA
CONCEALABLE AND TACTICAL BULLETPROOF VEST
HYBRID BULLETPROOF VEST
Skeletac Hybrid Bulletproof Vest can be worn as covert or overt carrier.
Essentially you have an on-the-go Bulletproof Vest that does not sacrifice style. In fact, this one is almost too sleek to realize it’s even bulletproof.
You can wear it to work or when you’re off duty because its tactical yet discreet enough to take away the attention you don’t need.
UP-ARMOR TO LEVEL IV PROTECTION
LEVEL IV UP-ARMOR
When worn together with level IIIA soft armor this Ace Link Armor ceramic composite hard armor plate has been designed to provide level IV protection against multiple .30-06 Armor Piercing rounds.
Composite PE and Ceramic structure absorb and completely contain rifle rounds, up to powerful .30-06 APM2.
Tested to be truly multi-hit, this plate is the most reasonable choice for those looking for Up-Armor Plate that stops AP rounds.
Protection against armor piercing .30-06 APM2 rounds has never been so light and risk-free.
BODY ARMOR MADE IN USA
Skeletac Hybrid Bulletproof Vest provides ballistic protection to ensure the wearer is safe when he needs it the most.
Ace Link Armor Skeletac Hybrid Body Armor provides comprehensive ballistic protection to ensure the wearer is safe when he needs it the most. NIJ.06 IIIA structure will stop multiple rounds of various handgun threats (up to .44 magnum).
NIJ.06 IIIA structure will stop multiple rounds of various handgun threats (up to .44 magnum). This vest accommodates front & back 10×12″ hard armor plates.
LIGHTWEIGHT BULLETPROOF VEST
This Body Armor will stop multiple threats:
- 9mm FMJ RN,
- 9mm Luger or NATO,
- .40 S&W,
- .357 Magnum,
- .357 Sig,
- .45 Gap,
- .44 Magnum
Unique hybrid construction utilize exceptional ability of woven fabrics to disperse impact energy and mitigate back face deformation while the panel core made of multiple UD fabric layers absorbs kinetic energy of the strikes – Round after round after round…
ULTRALIGHT AND SUPER-THIN PROTECTION
For those looking to save weight, Level IIIA Aramid Panels are one of the lightest ballistic panels on today’s market. These high strength but low density materials make them perfect for fitting within tactical gear or undercover operations where every gram counts!
STOPPING POWER AGAINST HANDGUN THREATS
The NIJ.06 IIIA structure will stop multiple rounds of various handgun threats, ensuring that you are protected from risk no matter what situation arises. There is no compromises when it comes to your safety!
There are no reviews on the product.
Your opinion may be the first.