This modular Special Operations Vest offers a versatile combination of Soft Body Armor panels for the front and back along with the capability to insert Hard Rifle Plates for maximum defense while maintaining a streamlined profile.
With the COMP-28, you have the flexibility to adapt your level of protection to suit specific threats. The front and back pockets accommodate Hard Rifle Plates, providing a higher level of ballistic protection when needed, without sacrificing mobility or comfort. Whether facing higher-risk scenarios or missions requiring additional reinforcement, the COMP-28 ensures you stay well-protected.
NIJ.06 LEVEL IIIA PROTECTION + ANTISTAB (.44 MAGNUM AND SPIKE 36J).
NIJ.06 IIIA + STAB 1 (S1/P1 BLADES AND SPIKE)
UP ARMOR :
Optional Level 4 – Up Armor : This vest can accommodate front and back 10×12″ hard armor plates, which can provide additional protection against high-velocity rifle rounds.
SIDE ARMOR :
Optional Side Armor: Left and Right side cummerbund side insert pockets for 6×6 or 6×8 size armor.
KEY FEATURES
Included Protection
Level 3A
Optional Up-Armor
Level 4
Optional Side Armor
6×6″ and 6×8″
Structure
Polyethylene
WARRANTY
ARMOR WARRANTY
5 Years
CARRIER WARRANTY
2 YEARS
DUAL THREAT PROTECTION
LEVEL 3A
Tested against both ballistic and edged weapon threats — PE-X vests stop knives and spikes in their tracks, providing unmatched peace of mind in unpredictable environments.” Test reports confirm zero penetration in multiple knife and spike attacks, ensuring officers are shielded against the most dangerous edged weapon threats.
With its NIJ.06 IIIA structure, it serves as a formidable barrier, capable of halting multiple rounds of various handgun threats, including up to .44 magnum calibers.
NIJ.06 LEVEL IIIA PROTECTION + ANTISTAB (.44 MAGNUM AND SPIKE 36J).
NIJ.06 IIIA + STAB 1 (S1/P1 BLADES AND SPIKE)
Standard Tested: NIJ-0115.00 (industry standard for stab resistance).
Threats Tested: P1A (knife-type) and S1 (spike-type), high-speed carbide blades.
Energy Levels:
E1 (24 J) and E2 (36 J).
Results:
Knife and spike attacks showed minimal penetration (0–11 mm).
Multiple impacts at both 0° and 45° angles were resisted successfully.
Most strikes resulted in zero penetration.
The vest prevents life-threatening stab injuries, even under extreme test conditions
PROTECTION HIGHLIGHTS
Level IIIA Protection
NIJ Rated .06 Body Armor
Up Armor
10×12″ Hard Armor Plates pockets on front and back
Handgun Protection
Stops Multiple Handgun rounds Up to .44 Magnum
Warranty
5 Years
COMP-28 Vest Features
Who Is This Vest For ?
Law Enforcement
Officers
Security
Guards
Emergency
Response
Special Operations
Forces
Close Protection
Teams
Military
Personnel
TACTICAL BULLETPROOF VEST
ACELINK ARMOR has ingeniously crafted the COMP-28 to preserve a streamlined physical profile. This design element ensures that your movements remain fluid and unhindered, a crucial advantage during tactical engagements where agility and speed can make all the difference.
RUGGED
MADE OF TOUGH 500D NYLON FABRIC, PLUS LOW REFLECTIVE MATTE BLACK LAMINATE NYLON SURFACES.
UP ARMOR
FRONT AND REAR INSERT PLATE POUCHES WITH PULL-TAB NO-FLAP SLASH OPENING AND HOOK AND LOOP CLOSURE.
MOLLE WEBBING
MOLLE webbing at all hard points; front, back, and sides for mounting MOLLE Pouches, IFAK’s, etc.
Overlap Sides
Extended sides for crucial ballistic overlap protection.
Side Armor
Left and Right side cummerbund accommodates option 6×6 and 6×8 armor Plates
Longer Design
Vest designed longer than other common short vests -that expose lower abdomen- without choking the wearer when seated.
Industrial grade hook-and-loop fasteners for critical torso and girth adjustments for all body-types.
ID PLACARDS
LARGE VELCRO AREAS FOR IDENTITY PATCHES
BODY ARMOR
Ace Link Armor’s NIJ Level IIIA ballistic panels combine multi-layer ballistic fabrics for a lightweight yet durable solution against a wide range of handgun and sub-gun threats. Rated to stop the following ammunition types:
9 mm FMJ RN
9 mm Luger / NATO
.40 S&W
.357 Magnum
.357 Sig
.45 GAP
.44 Magnum
7.62×25 TT Tokarev 85 gr
Key Advantages:
Lightweight Performance: High flexibility without sacrificing safety.
Comprehensive Threat Coverage: Tested to NIJ.06 Level IIIA for protection against the most common handgun calibers.
Trusted Reliability: Used by professionals requiring dependable, all-day ballistic protection.
UP-ARMOR TO LEVEL IV PROTECTION
When worn together with level IIIA soft armor this Ace Link Armor ceramic composite hard armor plate has been designed to provide level IV protection against multiple .30-06 Armor Piercing rounds.
Composite PE and Ceramic structure absorb and completely contain rifle rounds, up to powerful .30-06 APM2.
Tested to be truly multi-hit, this plate is the most reasonable choice for those looking for Up-Armor Plate that stops AP rounds.
Protection against armor piercing .30-06 APM2 rounds has never been so light and risk-free.
Bulletproof and Blade-Resistant Panel for Tactical Use
Stops Handgun / Slash Threats
Ballsitic Structure resists multiple rounds of handgun threats (up to .44 Magnum) and demonstrates strong resistance to knife and blade attacks, as shown in field testing
NIJ.06 IIIA Tested – Lightweight and Durable Ballistic Panel
Enhanced Blade Resistance – Withstands direct stabs and slashes under high impact conditions (based on in-house test video)
Ideal for Law Enforcement, Security Personnel, and Tactical Operations
Fragment Protection
Each Ace Link Armor vest is engineered for superior defense against both ballistic and fragmentation threats. Our armor has been independently tested to the STANAG 2920 standard, demonstrating protection against 17-grain fragments exceeding 2100 ft/s — setting a new industry benchmark for fragment resistance and wearer safety.
Key Benefits:
Fragment Defense: Certified protection from high-velocity fragments for unmatched survivability.
STANAG 2920-Certified: Verified resistance against 17-grain fragments above 2100 ft/s.
Enhanced Rifle Capability: Accepts 10×12″ front and back hard armor plates for protection against rifle rounds.
Mission-Ready Design: Combines ergonomic comfort with maximum coverage for law enforcement, military, and security personnel.
Built in the USA: Ensures consistent quality and reliability across every vest.
PE-X Soft Armor Panels
• Level IIIA + Multi-Threat Blade Resistance
• Bulletproof and Blade-Resistant Panel for Tactical Use
• Stops Handgun / Slash Threats
• Ballsitic Structure resists multiple rounds of handgun threats (up to .44 Magnum) and demonstrates strong resistance to knife and blade attacks, as shown in field testing
• NIJ.06 IIIA Tested – Lightweight and Durable Ballistic Panel
• Enhanced Blade Resistance – Withstands direct stabs and slashes under high impact conditions (based on in-house test video)
• Ideal for Law Enforcement, Security Personnel, and Tactical Operations
Reviews
There are no reviews on the product. Your opinion may be the first. Add it…
go back
YOUR SHOPPING CART
your cart is empty
Product protection from fraud, loss, theft & damage
SEARCH
my account
